Market

In export orders a coating is not ordinary cargo: FOB, dangerous goods packing and destination acceptance

Anyone who has run an export project knows the moment: paint is made, drums are packed, and the forwarder says this UN number needs dangerous goods packing certification — without it, nothing moves. The batch then waits two weeks in a warehouse.

The root cause is not logistics. It is treating paint as ordinary goods. Three properties have to be handled first: it is dangerous goods, it has a shelf life, and colour is tied to batch.

1. FOB and CIF differ by more than freight

FOB Shanghai transfers risk once the cargo crosses the rail. That sounds clean, but the buyer then handles destination clearance, dangerous goods declaration and inland transport — and many small overseas buyers hold no licence to receive dangerous goods. The cargo arrives and cannot be collected, and the seller ends up involved anyway.

CIF destination puts the seller in charge to the port: heavier responsibility but more control. For coating exports CIF is often the easier route — not because the seller wants the risk, but because the seller understands the dangerous goods status of the shipment better than the buyer.

What must be written down is who files the dangerous goods declaration. Leave it out and both sides will claim it was not their job.

2. The three documents that matter

First, UN number and class. Most solvent-borne coatings are UN1263 (Class 3 flammable liquid); some formulations fall to Class 8 corrosives. Class changes packing group, stowage position and segregation entirely.

Second, the dangerous goods packing certificate. It is issued per package, not per product — the same paint in 20-litre cans and in 200-litre drums may carry different packaging performance and certificate numbers. Changing packaging at the last minute is the classic failure.

Third, the SDS, and it must comply with the destination's rules. The EU wants REACH and CLP format, the US wants the 16-section OSHA HazCom 2012 layout, and parts of Southeast Asia require a local-language version. A Chinese SDS at clearance is roughly the same as none.

3. Destination acceptance is not just unloading

Many shipments are held at destination not for missing documents but for inconsistency: net weight on the packing list out by tens of kilos, batch numbers that do not match the COA, colour deviating from the contract sample. Trivial at home, a inspection trigger at clearance.

Three things to do at packing. Weigh every drum and record it against the packing list. Put the COA for each batch inside the container and email it to the buyer. Photograph the open container, focusing on drum labels, batch numbers and closures. Two hours of work that avoids two weeks of demurrage.

4. Shelf life is the hidden constraint

Solvent-borne coatings usually carry 12–24 months. Sea freight, clearance and inland transport consume 2–3 months between factory and site. If the goods then sit six months in the buyer's warehouse, the practical application window is narrow.

So: prioritise freshly produced batches for export, state the production date on label and COA, and write into the contract that remaining shelf life on arrival is at least X months. That clause protects the buyer better than a discount and stops the seller shipping old stock.

One more point: low-temperature transport affects some epoxy and water-borne systems, and freeze-thaw damages emulsion stability. For winter orders to Russia, the Nordics or Canada, confirm the product survives -20 °C transit, or specify a heated container.

5. The three commonest causes of return

Dangerous goods declaration omissions — a hardener classified as non-hazardous on its own, and the whole container gets inspected. Non-compliant labelling — the destination requires hazard warnings in the local language and English-only labels are sent back. Packaging leakage — insufficient lid torque, container temperature rises, and the whole container is contaminated.

All three are catchable in a 24-hour pre-loading check: UN number and class match the declaration, packing certificate covers the actual packaging, label language is compliant, lids are re-torqued, pallets secured.

Coating export is not hard technically; it is hard in completeness. Turn those details into a checklist and tick it at every loading — that beats experience.

Need selection advice?

Tell us your substrate and service conditions

One-to-one coating consultancy: system design, quantity take-off and quotation.

Contact us
WhatsApp