MODEL DATA

Interchar 973

BrandAkzoNobel
ModelInterchar 973
CategoryProtective coating

Interchar 973 is a Protective coating from AkzoNobel. This page groups model identity, system position and the data request entry so you can verify the full system before enquiring.

Key technical data

Volume solids70% ± 2%
Theoretical spreading rate1 m²/L
VOC2.83 lb/gal (340 g/L) US Environmental Protection Agency Method 24
Density / specific gravity1.34 kg/L (11.2 lb/gal)
Number of componentsOne-component
ThinnerNot recommended
Mixing ratioN/A

The technical content below is reproduced in English as published by the manufacturer; terms, grades and values follow the English original.

How this coating class protects

Models filed here sit in the manufacturer's broad industrial protective coatings class without being narrowed to primer, intermediate or topcoat. It may be a companion product in a series or a coating for a specific service. So the first step is not reading parameters but fixing which layer of the system it occupies, which decides what it pairs with, how thick it goes and when it is applied.

What to verify in the original TDS

These are checking criteria, not numeric commitments. Every figure follows the current original TDS.

  1. Position in the coating systemPrimer, intermediate, topcoat or single coat. Without that, neither compatibility nor thickness can be judged.
  2. Corrosivity category and typical serviceThe ISO 12944 C1–C5 and Im1–Im3 scale is the common language. Without it, selection is guesswork.
  3. Manufacturer's recommended system above and belowCross-brand combinations need separate confirmation; in-system recommendations are the safest.
  4. Thickness, solids and theoretical spread rateThese three set consumption, price and coat count.

Application control points

Fix the system position before discussing price

The same model plays different roles in different systems, with different consumption and companions.

Ask for the full TDS, not a parameter summary

Summaries usually drop surface preparation, overcoating windows and curing conditions, which are exactly where site problems start.

Trial a small batch before scaling

For cross-brand substitution or a new service, run a small area and record thickness and ambient conditions.

How to settle site disputes

Guessing purpose from the model name

Naming differs by maker and literal meaning often misleads. Go by the recommended use in the TDS.

Swapping models within a category

Chemical resistance, temperature limits and curing can differ widely inside one category. Compare item by item before substituting.

Common questions on this coating class

Where can this model be used?
It depends on its system position and chemical resistance. Send the service conditions (medium, temperature, corrosivity) and we answer on the whole system rather than a single drum.
Can you supply the original TDS?
Yes. Request by model and we provide the current manufacturer technical data sheet and safety data sheet, including transport assessment documents for export.

The above gives class-level technical requirements and judging methods. Specific values and systems follow the current original TDS and the project specification.

Place in the coating system

Primer–intermediate–topcoat layers and coat counts follow the exposure; DFT and curing conditions follow the original TDS and project specification.

Need the original TDS or a quote for this model?

Send the model, quantity, destination port and service conditions — we reply with a complete coating system, not a single can.

← AKZONOBEL / INTERNATIONAL Back to product catalog →
Need selection advice?

Tell us your substrate and service conditions

One-to-one coating consultancy: system design, quantity take-off and quotation.

Contact us
WhatsApp