General industrial: flexible in position, so selection leans harder on the actual service
This group holds grades not assigned to a specific role or resin type, including self-priming finishes and road-marking paints. 492 models — the largest group on the site.
Why does such a large group exist? Because many grades appear in manufacturer catalogues simply as 'protective coating', and the real application has to be read back from the technical data sheet. They may be moderate-performance epoxy, modified alkyd or polyurethane, with different film builds and systems, and one standard cannot cover them.
Self-priming finishes deserve separate mention: one coat does the work of primer and topcoat, saving a step and time. Suited to tight schedules, modest corrosivity (C2–C3) and ordinary appearance requirements. Weathering and chemical resistance are usually below a layered system, and using them at C4 or above, or in immersed service, is a common mistake.
Road-marking paints are functional coatings judged on abrasion resistance, retroreflectivity and drying speed. They have nothing to do with a corrosion system — for plant roads and warehouse floors, not as an anticorrosive topcoat, and not the other way round.
Selection works differently in this group. With no common role, every grade must be read on its own TDS for recommended DFT, system build and chemical resistance. That is why each model page keeps the full technical data — here the parameters matter more than the category.
All models in this group
Grouped by brand. Open a model for technical data, system position and in-category alternatives.
AKZONOBEL / INTERNATIONAL 98
JOTUN 88
HEMPEL 79
CMP 53
PPG 51
KANSAI 30
ZINDN 25
T&H 21
OSAKA 21
NIPPON 16
KCC 8
Tell us your substrate and service conditions
One-to-one coating consultancy: system design, quantity take-off and quotation.