Tank farm piping and pump-house protection

Coating system
| Layer | Material / system | DFT | Standard | |
|---|---|---|---|---|
| Primer | Epoxy zinc-rich / epoxy primer | 75 μm | ISO 12944-5 | |
| Intermediate | MIO epoxy; high-temperature epoxy on insulated sections | 125 μm | ISO 12944-5 | |
| Topcoat | Polyurethane topcoat | 50 μm | ISO 12944-5 | |
| Total system DFT | ≈ 250 μm | |||
Sulphur- and salt-laden industrial atmosphere; corrosion under insulation (CUI) is the main failure mode. Insulated lines use a high-temperature system.
Tank-farm piping and pump-house equipment sit in sulphur- and salt-laden industrial atmospheres; corrosion under insulation (CUI) and condensation are the main failure modes. Scope covered process lines, valves, pumps and steel supports.
External pipework uses an epoxy zinc-rich/epoxy primer with micaceous iron epoxy intermediate and polyurethane topcoat; insulated lines use high-temperature epoxy, while pump-house steelwork uses a surface-tolerant epoxy to minimise blasting.
Key controls were surface preparation and coverage at welds and support shadow zones; insulated areas followed a CUI-specific system. Ageing equipment was assessed for rust grade before deciding local versus full refurbishment.
The build-ups above are typical systems compiled from ISO 12944 and the relevant product technical data sheets; film thicknesses are reference values for the service conditions stated. For any specific project, the design specification, tender documents and the manufacturer's latest PDS govern. Actual performance depends on surface preparation grade, ambient conditions during application and recoat intervals.