Browse by category

Acrylic: fast drying is both the strength and the limit

Acrylics dry fast, hold colour and apply easily. Their natural place is temporary protection on new steelwork and decorative protection in mild corrosivity. 56 models.

What this category does in a system

Acrylics come in thermoplastic and thermosetting lines. Thermoplastic acrylic forms a film by solvent evaporation — single component, touch-dry in tens of minutes, extremely easy to apply, but poor in solvent resistance: a following solvent-borne topcoat lifts and wrinkles it. Thermosetting acrylic crosslinks with isocyanate, performs close to polyurethane with far better weathering and solvent resistance, and costs more.

The classic use is temporary protection alongside shop primer: steel pre-treated in the factory gets one acrylic coat that holds rust off for months during transport and storage, and can later be overcoated with epoxy or polyurethane systems (compatibility to be confirmed). Another common use is decorative topcoat in mild corrosivity — factory interior walls, warehouse steelwork.

Its boundaries are clear: no strong solvents, no long-term immersion, moderate acid and alkali resistance. Specifying acrylic in a chemical environment or an immersed area is effectively scheduling a rework.

Application is very forgiving; acrylic films form even at low temperature and high humidity, which is its biggest advantage over epoxy and polyurethane — on a winter site it is often the only coating that will dry. But note: a film formed cold is less dense, and long-term protection suffers for it.

All models in this group

Grouped by brand. Open a model for technical data, system position and in-category alternatives.

Need selection advice?

Tell us your substrate and service conditions

One-to-one coating consultancy: system design, quantity take-off and quotation.

Contact us
WhatsApp