Primers: the layer that decides whether a system survives
The primer is the only coat that bonds directly to steel. Once it lets go, no amount of build coat above it helps. This group covers primers, zinc-rich primers, anticorrosive primers, sealers, shop primers and galvanised-steel primers — 394 models.
Judging a primer comes down to three questions: what holds it on, how poor a surface it tolerates, and whether the intermediate coat will stick to it. Mechanically anchored types (epoxy iron oxide, zinc phosphate) need profile — Sa2.5 is ideal but St3 will do. Cathodic types (zinc-rich) must put zinc in direct contact with steel, so a layer of mill scale breaks the circuit. Chemically bonding types are the most oil-sensitive: incomplete degreasing lifts the whole film.
Zinc-rich primers split into organic (epoxy) and inorganic (ethyl or lithium silicate). Inorganic grades resist heat, solvents and weather better, but cure on ambient moisture, demand the strictest surface preparation and tend to crack at welds and edges. Epoxy zinc-rich is more forgiving and bonds better between coats — the default on most projects. More zinc is not automatically better: above roughly 85% zinc in the dry film, porosity rises and barrier performance drops.
Shop primer deserves its own paragraph. Its job is to keep plate from rusting during cutting, welding and storage — it is not the corrosion protection. Shop primer at cut edges and welds burns away and must be replaced with the same system's primer. Treating shop primer as the anticorrosive coat is the most common cause of rework in block assembly.
Acceptance covers three checks: dry film thickness (statistically, per the 85-15 rule), adhesion (pull-off or cross-cut; pull-off preferred on zinc-rich), and holidays (spark test or visual). One extra check for zinc-rich: was the pail stirred? Zinc settles, and the top and bottom of an unstirred pail are not the same product.
All models in this group
Grouped by brand. Open a model for technical data, system position and in-category alternatives.
AKZONOBEL / INTERNATIONAL 71
JOTUN 66
T&H 48
HEMPEL 38
PPG 38
ZINDN 32
OSAKA 27
KANSAI 23
NIPPON 20
CMP 15
KCC 10
Tell us your substrate and service conditions
One-to-one coating consultancy: system design, quantity take-off and quotation.