Browse by category

Phenolic epoxy: chemical resistance from crosslink density, at the cost of brittleness

Phenolic epoxy is a multifunctional epoxy with higher crosslink density than standard bisphenol-A, buying better heat, solvent and acid resistance. Tank linings, chemical piping and hot media are its home ground. 69 models.

What this category does in a system

Standard bisphenol-A epoxy starts to struggle above about 60 °C or in contact with aromatics, ketones, and concentrated acids or alkalis. Phenolic epoxy, with more functional groups, forms a denser network and steps up both chemical and thermal resistance. It is commonly used inside crude and product tanks, chemical storage tanks, and as solvent-resistant pipe lining.

Three costs come with it, all real. First, brittleness — high crosslink density means low flexibility, so thermal cycling or substrate movement cracks it; apply in thin passes and avoid heavy single coats. Second, slow, temperature-dependent cure: below about 15 °C it barely cures at all, so site work needs heating or extended curing, which is a hard constraint on schedule. Third, short pot life — mixed material is workable for far less time than standard epoxy, so plan crew size for large areas.

Never select without the medium list: substance, concentration, temperature, and whether exposures alternate. 'Acid resistant' covers both 30% sulphuric acid and 5% hydrofluoric acid, and hot alkali is not the same as ambient alkali. The manufacturer's chemical resistance table is the only reliable basis; guessing from experience is where projects go wrong.

Beyond routine DFT and adhesion, tank linings require holiday testing and a cure check. Phenolic epoxy that is incompletely cured looks dry but has almost no chemical resistance — blistering and softening appear within days of filling, and that rework is extremely expensive.

All models in this group

Grouped by brand. Open a model for technical data, system position and in-category alternatives.

Need selection advice?

Tell us your substrate and service conditions

One-to-one coating consultancy: system design, quantity take-off and quotation.

Contact us
WhatsApp